DTA Universal Tile Lippage Leveling System Spacers
Features
- Very easy to learn and use at any skill level
- Increase the speed of installation
- Gun Tensions cap and spacer together
- The gun can be used for walls and floors
- 1/16″ (1.5mm) grout joint
- Universal lippage spacer dimensions: 4-1/4″ (108mm) High x 7/16″ (11mm) Wide
Spacers Features
- Serrated on both sides
- Longer spacers (pavers)
- Curved base to tension different tile thickness
- No soaking required
- Ideals for floors and walls
How to use the Lippage System
- Place Lippage Spacer between tiles 4″ from both ends of the tile
- Once the tile and spacer are in place, fasten the Lippage Cap. There is a cap release lever to allow the cap to be removed if necessary
- Clamp the two pieces together, leveling the tiles using the leveling gun holding the tiles in place while the tile adhesive sets
- Once the tile adhesive has dried, kick along the grout joint to remove it. Use a white rubber mallet to remove from walls. Grout to finish the tiled area
- Remove Cap from Spacer for re-use
- The tool is specific to this system only and can not be used on other similar
